Product Description

• 7.0-inch high-definition color screen, supporting 16bit RGB 65K color display, with rich display colors
• Support 800×480 resolution, and the display effect is very clear
• Using 16-bit parallel bus transmission with fast transfer speed
• Compatible with capacitive touch screen and resistive touch screen
• Support SPI flash
• With SD card slot, support SD card expansion
• Support three backlight control modes (always on, GPIO control, PWM control)
• Provides a rich sample program for STM32 and C51 platforms
• Military-grade process standards, long-term stable work
• Provide underlying driver technical support

Product Parameters

• Display Color: 16BIT RGB 65K color
• Screen Size: 7.0(inch)
• Screen Type: TFT
• Driver IC: SSD1963
• Resolution: 800×480(Pixel)
• Module Interface: 16Bit parallel interface
• Active Area: 154.08×85.92(mm)
• Touch Screen Type: Capacitive touch screen or Resistive touch screen
• Touch IC: GT911 (capacitive touch), XPT2046 (resistive touch)
• Module PCB Size: 181.00×108.00(mm)
• Operating Temperature: -10℃~60℃
• Storage Temperature: -20℃~70℃
• Operating Voltage: 5V
• IO Voltage: 3.3V

Interface Definition

• GND: power ground pin
• EX_3.3V: Power input pin (connected to 3.3V), not used
• NC: Undefined, reserved
• RS: LCD register / data selection control pin (high level: register, low level: data)
• WR: LCD write control pin
• RD: LCD read control pin
• DB8 ~ DB15: LCD data bus high 8-bit pin
• CS: LCD reset control pin (low level enable)
• F_CS: SPI FLASH chip selects control pin (low level enable)
• REST: LCD reset control pin (low level reset)
• 5V: Power input pin (connected to 5V)
• LED_A: LCD backlight control pin (it needs to be used according to the selection)
• NC/INT: There is no definition when connecting the resistance touch screen, Used as interrupt pin when connected to capacitive touch screen
• DB0~DB7: LCD data bus low 8-bit pin
• T_CLK: Resistance touch screen SPI bus clock pin
• T_CS: Resistive touch screen chip selection pin (low level enable)
• T_DIN: Resistance touch screen SPI bus write data pin
• NC/CRT: There is no definition when connecting the resistance touch screen,Used as reset pin when connected to capacitive touch screen (low level reset)
• T_DO: Resistance touch screen SPI bus read data pin
• T_IRQ: Resistance touch screen interrupt detection pin (active at low level)
• SD_DO: SD card SDIO bus read data pin
• SD_CLK: SD card SDIO bus clock pin
• SD_DIN: SD card SDIO bus write data pin
• SD_CS: SD card pin selection (low level enable)
• NC/SDA: There is no definition when connecting the resistance touch screen,As IIC bus data pin when connected to capacitive touch screen
• NC/SCL: There is no definition when connecting the resistance touch screen, Used as IIC bus clock pin when connected to capacitive touch